Covestro solutions for wind power in the upswing

A new polyurethane resin in combination with fiberglass mats and an innovative production technology allow a more cost-efficient production of rotor blades for wind turbine

Antonella Ravera

Together with global industry partners, Covestro has developed an innovative solution for an efficient production of rotor blades for wind power plants

Power generation from renewable sources is a key part of the sustainability concept of Covestro (Hall 6, Booth A75) and underlines its commitment to achieving the UN Sustainable Development Goals, in particular goal number 7 for renewable energy (UN-SDG 7). This applies above all to wind power, which is seeing double-digit annual growth across the globe. China is the world’s largest wind power market with 221 GW of installed capacity at the end of 2018, according to the World Wind Energy Association.

Concept for cost-efficient production of rotor blades

For this reason, cost-efficient processes for manufacturing wind power plants are in greater demand than ever to enable further expansion and for competing with traditional energy resources. Once in operation, the aim is for turbines to be used over a lengthy period with the lowest possible maintenance requirements. In order to meet this challenge, Covestro has joined forces with partners and developed a polyurethane (PU) resin and a manufacturing technology, which – in conjunction with glass fiber mats and an efficient production process – enables shorter cycle times. «This is a clear cost advantage for manufacturers» says Dirk Soontjens, who coordinates the global wind power activities of Covestro. «Its advantage over epoxy resins used so far is that it flows more easily and ensures better wetting of the glass fiber mats used for reinforcement». The resin also exhibits very good mechanical properties and meets many regulatory and industry performance standards.

Progress in China and Europe

Recently, Covestro has processed the first commercial order for utilization of the PU resin for production of eighteen wind rotor blades with a length of 59.5 meters each, together with the respective spar caps and shear webs, all manufactured by Zhuzhou Times New Material Technology (TMT), one of the largest wind blade manufacturers in China. The blades were delivered to Envision, a leading global wind turbine technology company, and were installed in a wind farm in Eastern China in July 2019. Also in Europe, Covestro collaborates with leading players of the wind power industry and intends to commercialize its technology shortly. Besides that, the company operates a new wind power laboratory in Leverkusen, which expands its global lab capacities in Asia and Europe to support customers and innovation.

High performance coatings

Covestro has also developed coating solutions with higher cost efficiency. For instance, protective coatings based on Pasquick® technology for steel towers as well as gel coatings for blades of wind power plants significantly increase productivity and ensure a long lasting performance without maintenance. This is due to the fact that the use of Pasquick requires one layer less than conventional corrosion protection and that the coatings have a lower curing time. Besides that, waterborne topcoats based on Bayhydur® and Bayhydrol® provide long-lasting performance with low solvent emissions. Last but not least, Covestro also offers leading edge protection for rotor blades based on products of the Desmodur® line, providing long lasting protection against abrasion.


Please enter your comment!
Please enter your name here